Get Quotes
Services
Systems
Extraction SystemsCollector InstallationDucting InstallationMobile Extractors
Collectors
Baghouse FiltersCartridge CollectorsDust Cyclones
Fumes
Fume ExtractionSpray Booths
Fans
Extractor Fan InstallationExtractor Fan RepairsExtractor Cleaning
Repairs
Collector RepairsSystem Refurbishment
Company
AboutReviewsContact

Ducting Installation South Africa

Get the best quote, fast
Leaderr approved Ducting Installation South Africa

Is the ducting there?

Ducting Installation South Africa is the pipework between the machines and the collector, and it decides whether a well chosen unit pulls at all. Diameter, bends, length and leaks all cost pressure, and the fan pays for every one of them. Say how long the run is and how many machines it reaches, and get quotations to compare.

  • Know what a metre of ducting should cost installed, so you never pay too much.
  • Send the same layout to several extraction companies, and quotes come back fast.
  • From LEADERR APPROVED providers, vetted and backed by many verified 5-star reviews. Peace of mind that the run is sized rather than built to whatever pipe was on the shelf.

Say how long the run is, and get ducting quotes.

Get the Best Quote

Ducting Installation Prices

Ballpark figures so you can check a quotation.

ItemBallpark price
Galvanised spiral duct, 100mm, per metre installedR320 - R850
Galvanised spiral duct, 150mm, per metre installedR450 - R1,100
Galvanised spiral duct, 250mm, per metre installedR750 - R1,900
Galvanised spiral duct, 400mm, per metre installedR1,400 - R3,600
Long radius bend, fittedR650 - R3,800
Blast gate, fittedR900 - R3,200
Machine hood or pickup, fittedR1,200 - R8,500
System balancing and airflow testR3,500 - R18,000

Prices JUST UPDATED. Ballpark figures, rounded, excluding VAT. They reflect typical South African dust extraction, fume and ventilation rates. They are not our prices or quotations, and no provider is bound by them. An extraction system is quoted on the AIRFLOW IT HAS TO MOVE and the machines running at the same time, not on the floor area of the building, so confirm what each quotation includes, such as the airflow it is sized for, the ducting, the hoods at each machine and the electrical connection.

What a Ducting Quote Covers

  • The duct itself. Spiral or folded seam, in the diameter the airflow needs.
  • Bends and branches. Long radius bends and angled branches, not tight tees.
  • Blast gates. One per machine, so unused branches are not stealing air.
  • Hoods and pickups. What sits at the machine, which decides what gets caught.
  • Supports and sealing. Hangers, brackets and sealed joints along the whole run.

Where Quotes Differ Most

  • Diameter. Undersized duct is cheaper to buy and starves every machine on it.
  • Bend quality. Long radius bends cost more and save pressure on every pass.
  • Height and access. Roof level work needs a scissor lift or a scaffold.
  • Material. Galvanised, stainless or antistatic duct on an explosive dust.
  • Whether it is sealed. A leaking run loses suction at the far machine first.

How the Work Runs on Site

  • The layout is set out. The shortest route with the fewest bends, clear of cranes.
  • Diameters are calculated. So transport velocity holds right to the last branch.
  • Supports go up first. Then the main run, then the branches down to machines.
  • Gates and hoods are fitted. At each machine, within reach of the operator.
  • The system is balanced. Gates set and airflow measured at every hood.

Get a price for your own layout rather than a range.

Get the Best Quote

What Affects the Price

  • The diameter. Price per metre roughly tracks it, and so does whether the system works.
  • How many bends. Each one costs pressure and each one is a fitting to buy.
  • The height. Work above about three metres needs a lift and two people.
  • How many branches. Every machine adds a branch, a gate and a hood.
  • The material. Stainless, antistatic and heavier gauge all carry a premium.
  • Whether the shop runs. Working around production is slower than an empty building.

What to Include in Your Request

  • The address. Suburb and town, so an installer knows whether they work there.
  • A rough layout. A sketch with machine positions and where the unit will stand.
  • The run length. From the unit to the furthest machine, even approximately.
  • Machine port sizes. The diameter at each machine, which sets the branches.
  • Roof height. And whether there is a crane or anything else in the way.
  • What the dust is. Some dusts need earthed or antistatic duct.

Before You Appoint an Installer

  • Ask what diameter and why. A calculated size, not whatever matches the machine port.
  • Ask about the bends. Long radius or pressed, because the difference is real.
  • Ask whether gates are included. Without them the far machines never get their air.
  • Ask how joints are sealed. A leaking run is invisible and costs suction every day.
  • Ask whether balancing is in it. Ducting that is never balanced was half installed.
  • Ask about the hoods. What is caught at the machine is the whole point of the run.

Ducting Installation FAQs

What does extraction ducting cost per metre?

Installed, roughly R320 to R850 a metre at 100mm, R450 to R1,100 at 150mm and R1,400 to R3,600 at 400mm. Bends, branches, blast gates and the hoods at each machine are usually the larger half of the total on a short run.

Can I use PVC pipe for dust extraction?

It is common in small wood shops and it is cheaper, but it does not earth, it embrittles, and on anything beyond a hobby shop galvanised spiral is what gets specified. Where the dust carries any explosion risk, plastic duct is the wrong answer.

Why is my furthest machine extracting badly?

Usually open blast gates elsewhere in the shop, then leaks at the joints, then a duct diameter that was never sized for the run. Balancing the gates and sealing the joints fixes more far-machine complaints than a bigger fan does.

Does duct size matter that much?

It decides whether the air moves fast enough to carry the dust. Too large and the dust settles in the pipe and eventually blocks it; too small and the fan cannot pull the airflow. Both faults are built in on the day and expensive to change later.

How often should ducting be cleaned?

A properly sized run carries its own dust and rarely needs it. One that has settled dust in it has a velocity problem, so the clean is worth doing with an inspection of why it filled, not as a routine on its own.

Ducting is the half of an installation that is easiest to underprice on Dust Extraction South Africa which is why it is worth comparing quotations line by line.

Related Services

Extraction Systems›
Dust Cyclones›
Collector Installation›
System Refurbishment›

Get the Best Quote, Fast

Client Reviews

Powered by leaderr

WhatsApp