What size booth?
Spray Booths South Africa are a sealed room with its own air: filtered air in, overspray pulled out through a floor or back wall filter, and often heat for the bake. They are quoted on the size of the booth, the airflow and whether heating is included. Say what you spray and how big the work is, and get quotations to compare.
Super easy & fast
- Know what a booth and its filters should cost, so you never pay too much.
- Send the same booth details to several extraction companies, and quotes come back fast.
- From LEADERR APPROVED providers, vetted and backed by many verified 5-star reviews. Peace of mind that the airflow and the filtration are specified rather than assumed.
Say what you spray and the size you need, and get booth quotes.
Get the Best QuoteSpray Booths Prices
Ballpark figures so you can check a quotation.
| Item | Ballpark price |
|---|---|
| Open face spray booth, small | R45,000 - R160,000 |
| Panel or prep bay, enclosed | R120,000 - R420,000 |
| Full vehicle booth, no heating | R280,000 - R750,000 |
| Full vehicle booth with bake | R550,000 - R1,800,000 |
| Industrial booth, per square metre of floor | R6,500 - R22,000 |
| Paint arrestor filter set | R1,500 - R9,000 |
| Intake ceiling filter set | R3,500 - R18,000 |
| Installation and commissioning | R35,000 - R250,000 |
Prices JUST UPDATED. Ballpark figures, rounded, excluding VAT. They reflect typical South African dust extraction, fume and ventilation rates. They are not our prices or quotations, and no provider is bound by them. An extraction system is quoted on the AIRFLOW IT HAS TO MOVE and the machines running at the same time, not on the floor area of the building, so confirm what each quotation includes, such as the airflow it is sized for, the ducting, the hoods at each machine and the electrical connection.
What a Booth Quote Covers
- The booth structure. Panels, doors, lighting and the floor or pit under it.
- Air in. Supply fan, intake filters and the plenum that spreads the air evenly.
- Air out. Extraction fan, paint arrestor filters and the stack.
- Heating, if included. Burner, heat exchanger and the controls for a bake cycle.
- Controls and safety. Interlocks, pressure control and the electrics inside the booth.
Where Quotes Differ Most
- Booth size. A panel booth and a full vehicle booth are different buildings.
- Downdraught or crossdraught. Downdraught needs a pit or a raised floor and costs more.
- Whether heating is in it. The burner and its gas or diesel supply are a large share.
- Airflow and filtration. Finish quality follows airflow, and airflow follows the fan.
- Site work. Slab, pit, roof penetration and the gas line are often quoted separately.
How the Work Runs on Site
- The slab and services are prepared. Pit, ducting route and the power or gas supply.
- Panels go up. Usually the quickest looking part and the one that sets the squareness.
- Fans and ducting are installed. Supply and extract, with the stack through the roof.
- Heating and controls are wired. Commissioned by the supplier, with the interlocks proven.
- Airflow and balance are set. Slight positive pressure, so dust is not drawn in.
Get a price for your own workshop rather than a range.
Get the Best QuoteWhat Affects the Price
- The size of the work. Panels, furniture, a vehicle or a truck set the booth footprint.
- Downdraught or crossdraught. The floor pit is the single biggest build cost difference.
- Whether it bakes. Heating adds a burner, a fuel supply and most of the controls.
- What you spray. Solvent, water based and powder have different filter and air needs.
- The building. Roof height, slab condition and whether a stack can go up.
- The fuel. Gas, diesel or electric heating are three very different running costs.
What to Include in Your Request
- The address. Suburb and town, so a company knows whether they work there.
- What you spray. Vehicles, panels, furniture, steelwork or product.
- The size needed. The largest item that must fit, with the doors open.
- Whether you need a bake. A prep bay, an air dry booth or a full bake cycle.
- The building. Roof height, slab, and where a stack could go.
- Power and fuel. Three phase supply, and whether gas or diesel is available.
Before You Appoint a Supplier
- Ask what airflow it is designed for. Finish quality follows airflow more than it follows panels.
- Ask what the filters cost. Arrestor and ceiling filters are a repeat cost, not a one-off.
- Ask what site work is excluded. Pit, slab, gas line and roof penetration are the usual four.
- Ask about the controls. Pressure balance and interlocks, and who commissions them.
- Ask what the running cost is. A bake booth on diesel and one on gas are not comparable.
- Ask to see one they installed. Running, a year or two old, with the filters current.
Spray Booths FAQs
What does a spray booth cost in South Africa?
An open face booth is commonly R45,000 to R160,000 and an enclosed panel or prep bay R120,000 to R420,000. A full vehicle booth runs R280,000 to R750,000 without heating and R550,000 to R1,800,000 with a bake cycle, before site work.
Downdraught or crossdraught?
Downdraught gives the cleanest finish because the air carries overspray down and away from the work, but it needs a pit or a raised floor and costs considerably more to build. Crossdraught is cheaper and is adequate for a great deal of general work.
How often do booth filters need changing?
Paint arrestor filters are commonly changed every one to three months in steady use, and ceiling intake filters once or twice a year. Running them past their life drops the airflow, which shows up as dirt in the finish before anything else.
Does a spray booth need to be heated?
Only if you need to bake. A prep bay or an air dry booth with good airflow handles a great deal of work, and heating is the largest single cost in both the build and the running. Turnaround time is what usually justifies it.
What does the installation include?
Normally the booth, its fans, ducting and controls, commissioned. The slab, the pit, the gas or diesel supply, the roof penetration and the electrical feed to the booth are frequently quoted separately, so ask which of the five are in your number.
Booth work is usually bought from the same companies that handle fume extraction on Dust Extraction South Africa so it is worth asking for both in one request.
Related Services
Get the Best Quote, Fast
Client Reviews
Powered by leaderr

